FREEZE DRYER CHAMBERS, ACCESSORIES & SPARES

To suit LyoDry Compact and LyoDry Midi Freeze Dryers.
Also compatible with most Modulyo and Supermodulyo Freeze Dryers

Please Contact Us for a quotation  or any further information about any of the products below 

Chambers and Accessories

Freeze Dryer Spares

Freeze Dryer Chambers and Accessories

ACRYLIC DRYING CHAMBER

Part No: LSDC

Acrylic drying chamber: 350mm diameter x 435mm high, including clear acrylic lid and 2 x L-gaskets (direct replacement for Edwards part no F056-52-000)

USE WITH:

 - LYODRY COMPACT

 - LYODRY BENCHTOP PRO
 - LYODRY MIDI

 - LYODRY MIDI PRO
 - MODULYO
 - SUPERMODULYO

6-TRAY DRYING RACK ASSEMBLY

Part No: LSD6

6-tray drying rack assembly (for use inside LSDC acrylic chamber 350mm x 435mm), SS, unheated

 

Each individual tray is 284mm diameter x 30mm height. Trays are removable. Individual replacement trays can also be supplied (Part No LSDT1)

USE WITH:

 - LYODRY COMPACT

 - LYODRY BENCHTOP PRO
 - LYODRY MIDI

 - LYODRY MIDI PRO
 - MODULYO
 - SUPERMODULYO

 

24-PORT-COLUMN MANIFOLD

Part No: LSPM24

24-Port column manifold for external drying in flasks. Includes 24 removable neoprene valves, suitable for flasks of up to 1 litre capacity (flasks not supplied) and manifold sealing gasket. Note: B24 nor B29 cone adaptors are not included, but can be quoted upon request.

USE WITH:

 - LYODRY COMPACT

 - LYODRY BENCHTOP PRO
 - LYODRY MIDI

 - LYODRY MIDI PRO
 - MODULYO
 - SUPERMODULYO

ACRYLIC DRYING CHAMBER WITH 8-PORT VALVE LID ASSEMBLY

Part No: LSDCV

A multipurpose freeze drying chamber for bulk drying and flask drying comprising: Acrylic drying chamber: 350mm diameter x 435mm high, and 2 x L-gaskets. Complete with 8-port valve lid assembly, including 8 x removable, neoprene vacuum isolation valves, 3/4" ID

USE WITH:

 - LYODRY COMPACT

 - LYODRY BENCHTOP PRO
 - LYODRY MIDI

 - LYODRY MIDI PRO
 - MODULYO
 - SUPERMODULYO

Part No: LSAD6H

HEATED TRAY DRYING ACCESSORY

PART NO: LSAD6H

Heated tray drying accessory comprising: 
Acrylic drying chamber 350mm diameter x 435mm, lid and 2 x L-gaskets, complete with 6 SS product tray rack assembly, heater mats and temperature controller. 230V, 50Hz  (alternative supply available upon request)

USE WITH:

 - LYODRY COMPACT

 - LYODRY BENCHTOP PRO
 - LYODRY MIDI

 - LYODRY MIDI PRO
 - MODULYO
 - SUPERMODULYO

FREEZE DRYER CHAMBER, SS, WITH REMOVABLE TRAYS

Part No: LSCC10

SS freeze drying chamber, with 10 removable trays each measuring 450mm wide x 345mm deep. Gap between tray support rails 85mm. With single viewport. Available unheated as standard (part no LSCC10), or with optional heating (part no LSCC10H). Optional manifold assembly for flask drying.
Download technical specification >

USE WITH:

 - LYODRY MIDI

 - LYODRY MIDI PRO

 - SUPERMODULYO 

SECONDARY DRYING MANIFOLD

Part No: LSDM48

48-port secondary drying manifold. Note: the image shows a 96-port secondary drying manifold. Also available: 24-port and 96-port secondary drying manifolds  - please ask for details.

SPIN FREEZER

Part No: LSSP

The Spin Freezer utilizes evaporative cooling and centrifugation to freeze samples in a thin layer on one side of each ampoule for faster drying.

 

Spin freezer with 5 interchangeable carriers, 230V, 50Hz supply (alternative supply available upon request)

BENCHTOP FREEZE DRYER TROLLEY

Part No: LSCT

Purpose built SS trolley with castors and brakes, with bottom shelf to accommodate vacuum pump. Specially designed to be lower than a standard lab bench for easy access to drying accessory

 

Dimensions for -55 version (part nos LSBC55 or LSB55P) :
532mm W x 662mm L x 615mm H (inc. castors). 2 x fixed castors and 2 x swivel castors with brakes (castor wheels 50mm diameter). Part No: LSCT55

Dimensions for -85 version (part nos LSBC85 or LSB85P) :
632mm W x 747mm L x 615mm H (inc. castors). 2 x fixed castors and 2 x swivel castors with brakes (castor wheels 50mm diameter). Part No: LSCT85

USE WITH:

 - LYODRY COMPACT
 - LYODRY BENCHTOP PRO

 

RUBBER VALVE FOR COLUMN MANIFOLD

Part No: LSRV

Neoprene rubber/plastic manifold vacuum isolation valve, 3/4" ID (F05648000).​ Measurements (approximately): each end: 30mm OD with 16mm hole diameter

USE WITH:

 - LSPM24  24-PORT COLUMN MANIFOLD
 - LSDCV 8-PORT ACRYLIC CHAMBER
 - EDWARDS COLUMN MANIFOLD

 - EDWARDS DRUM MANIFOLD

B19 ADAPTOR

Part No: LSB19

B19 rubber adaptor, to connect manifold tap to freeze drying flask (flasks not supplied). Measurements (approximately): one end: 12mm OD with 5mm hole diameter; other end: 20mm OD with 12mm hole diameter; length: 32mm

USE WITH:

 - LSPM24  24-PORT COLUMN MANIFOLD
 - LSDCV 8-PORT ACRYLIC CHAMBER
 - EDWARDS COLUMN MANIFOLD

 - EDWARDS DRUM MANIFOLD

B24 ADAPTOR

Part No: LSB24

B24 rubber adaptor, to connect manifold tap to freeze drying flask (flasks not supplied). Measurements (approximately): one end: 22mm OD with 6mm hole diameter; Other end: 25mm OD with 12mm hole diameter

USE WITH:

 - LSPM24  24-PORT COLUMN MANIFOLD
 - LSDCV 8-PORT ACRYLIC CHAMBER
 - EDWARDS COLUMN MANIFOLD

 - EDWARDS DRUM MANIFOLD

Freeze Dryer Spares

B29 Adaptor

Part No: LSB29

B29 rubber adaptor, to connect manifold tap to freeze drying flask (flasks not supplied). Measurements (approximately): one end: 26mm OD with 9mm hole diameter; other end: 29mm OD with 12mm hole diameter

USE WITH:

 - LSPM24  24-PORT COLUMN MANIFOLD
 - LSDCV 8-PORT ACRYLIC CHAMBER
 - EDWARDS COLUMN MANIFOLD

 - EDWARDS DRUM MANIFOLD

Plastic connector

Part No: LSPC

Plastic connector  - to connect B19, B24 or B29 adaptor to LSRV rubber valve. Measurements (approximately): one end: 12mm OD with 7mm hole diameter; other end: 16mm OD with 12mm hole diameter

USE WITH:

 - LSPM24  24-PORT COLUMN MANIFOLD
 - LSDCV 8-PORT ACRYLIC CHAMBER
 - EDWARDS COLUMN MANIFOLD

 - EDWARDS DRUM MANIFOLD

Adaptor nipples for Secondary Drying Manifold

Part No: LSAN

Replacement adaptor nipples, 6mm thread, cone diameter 5 - 7.5 mm, minimum order quantity of 48 pieces (F00203008) 

USE WITH:

  - LSDM48 SECONDARY DRYING
     MANIFOLD

  - EDWARDS SECONDARY DRYING
     MANIFOLD

Acrylic Lid

Part No: LSLID

Acrylic lid, clear, 350mm diameter x 25mm thickness, for Acrylic Chamber 

 

(direct replacement for Edwards part number F056-32-000)

USE WITH:

 - LSDC  ACRYLIC CHAMBER
 - LSDCV ACRYLIC CHAMBER
 - EDWARDS 350MM ACRYLIC CHAMBER
    FOR MODULYO

Acrylic Lid with 8 ports

Part No: LSVLID

Acrylic lid, clear, 350mm diameter with 8-ports and 8 removable, neoprene vacuum isolation valves, 3/4" ID.

USE WITH:

 - LSDC  ACRYLIC CHAMBER
 - LSDCV ACRYLIC CHAMBER
 - EDWARDS 350MM ACRYLIC CHAMBER
    FOR MODULYO

L Gasket for Acrylic Chamber

Part No: L-GASKET14

14" L-gasket, nitrile, for benchtop freeze dryer, acrylic drying chamber (for sealing lid and base of acrylic chamber).

USE WITH:

 - LSDC  ACRYLIC CHAMBER
 - LSDCV ACRYLIC CHAMBER
 - EDWARDS 350MM ACRYLIC CHAMBER
    FOR MODULYO

Need further information, a quotation or to place an order?

Please contact us:

MECHATECH  SYSTEMS  LTD, BRISTOL, BS35 3UR, UK 

  • Linked In
  • Twitter
  • Instagram
  • Facebook

Registered in England and Wales No 06469333 | VAT No: 928 7530 93  | DUNS No: 211040934 | © 2020 MechaTech Systems Ltd - all rights reserved